Chevy Volt BMS assembly for 60vdc 15 cell VOLT battery with charger control*

Description

For sale is a NEW BMS assembly for Chev Volt 60vdc battery. easy to install by user. BMS assembly in white/black  box
will monitor and balance the battery cells providing a longer life span for the installed battery not included
with BMS. Installation requires installing the orange plug into battery receptacle, connecting negative lead with eye ring
to battery negative post. A optional lead from the BMS is provided for a 60vdc negative connection to a charger
designed for lead acid, etc. The BMS will disconnect the 60vdc negative to the charger when battery is fully charged
at about 62vdc. A 62vdc relay should be used if the charger exceeds 15smp output, available from seller as a option.
This same 60vdc negative lead can be used for powering a low current device that will disconnect when the battery is
depleted. This can be the contactor on a golf cart, EV, boat and solar charge controller inverter. Seller can
provide support after purchase if required. Wire colors and wire type may vary from the picture. *If the charging negative
lead on BMS is desired please indicate at time of check out. Color of wires may be other than colors in picture.
Parameter:
Overcharge Detection Voltage: 4.25±0.05V
Over Discharge Detection Voltage: 2.5V±0.05V
Upper working current: 15A
Size: 60mm x 40mm x 3.6mm
Upper limit instantaneous current: 20A
Quiescent Current: less than 30uA
Short circuit protection: can be protected,Delayed self-recovery
Charging voltage: 15S 62.V