Collomix Xo55 Duo Hand-Held Mixer, 110V, Output 13.1 amps / 1.9 hp

Description

Collomix Xo55 duo hand-held mixer
Strong, manual forced action mixer for highest require­ments
MKD (duo) interchangeable Paddle
To help you master every material! This is a powerful forcedaction mixer for the highest of requirements; powerful and uncompromising in the material, it is comfortable to use and takes the physical strain off the user. Excellent ergonomics due to upright working position; acceleration electronics for continuously variable rotational speed control. With HEXAFIX® coupling.
Coun­ter-ro­ta­ting mixing tool
Force­d-ac­tion mixing effect
Out­stan­ding ergo­no­mics
Adjus­ted working height
With HEXA­FI­X®-­Cou­pling
Rub­ber pro­tec­tive slee­ves
Mixing quantity 90 Litres
Power rating 1450 Watts
Diameter Paddle 210mm
Mixing capacity 24 gallons
Quick and intensive mixing with the Xo duo double spindle mixer
The
Xo duo hand-held mixer
makes work particularly efficient. Thanks to the compulsory mixing effect –the spindles working in opposite directions – the material is mixed quickly and intensively: It is passed through the mixing tool and does not escape. This brings about the best working results, even for the most difficult-to-mix materials. Meanwhile, no counter-torque retroacts on the operator, which makes guiding the mixer through the material easier. By interchanging the mixing tools, the mixing effect can be reversed, which can be advantageous when working with fluid materials.
The Xo duo hand-mixer has an excellent ergonomics. With its enhanced design, it enables you to work in an upright position without bending your back. Shaped grip handles enable form-fit and friction-locked handling for optimum control of the mixer with significantly-reduced effort. The Hexafix quick coupling offers comfort and safety with firmly defined installation positions for colour-coded mixing tools. To remove or change the mixer, just pull the sleeve on the coupling and the mixer will be released. Protective caps stop the coupling from becoming dirty and ensure perfect functionality.
TASK: MIX ADHESIVE MORTAR QUICK-MIX SKS-L WITH THE Xo DUO
Observe the basic details about the device and material in the operating instructions or in the manufacturers’ technical data sheets. Insertion of mixing tools – error-free thanks to Hexafix coupling and colour-coding. Refer to the container for the amount of water required, and measure out in a vessel. Pour water into the mixing bucket. Keep to the correct order: first the water, then the adhesive mortar. Always hold the hand-mixer with both hands. Put the hand-mixer in the mix and start it at the same time. Work at a reduced motor speed at the start and end of the mixing process to avoid splashes and jerks. During the mixing process, the paddle must be completely covered with material. At the start of the mixing process, the effect of the mixing can still be clearly observed. During the further course of the mixing process, increase the motor speed to the maximum and maintain for the entire mixing time. Only in this way does the mixing tool work efficiently and with sufficient cooling of the motor. Pass the machine through the mixing bucket during the mixing process. Mix until all the mix has been thoroughly mixed in and completely worked through.
The result: clump-free, evenly-mixed material in a consistency which is ready for use
.