Fence Lever OEM Ridgid TS2400-1, TS3650 or TS3660 Replacement For Part TH101904

Description

Please Note: OUR FENCE LEVER IS AN AUTHENTIC OEM RIDGID LEVER AND IS NOT 3-D PRINTER MANUFACTURED. IT WAS REDESIGNED BY RIDGID.
If you are looking for a Fence Lever for the Ridgid Table Saw TS2400-1, TS24121 or TS24120, TS3650 or TS3660,
with a
Broken Fence Lever
you have probably been told that there is
NO REPLACEMENT
.  This one will also work for you if you have the
Ridgid Models, TS-2400-1, TS24121 or TS24120, TS3650 or TS3660 Table Saw.
Have you had the experience that your table saw was rendered useless without this part for your Fence with a
Broken Fence Lever.  Y
ou have probably been told that there is
NO REPLACEMENT
.
Acts as a Workable Replacement for Levers:
824353-2  and  TH101904
Although it took some doing I found the part and now I am making these available for those of you who were in the same boat I was in.  It is an easy install / replacement that anyone can do. It took me about 7 minutes tops and then I had a working unit again. When changing this part there is a nut at the end of the fence. Simply count the number of turns you have to turn to take the existing one off and after changing this part turn the same number of turns to tighten that nut and you should be good.
Y
ou see sometimes these companies tell you parts are "
obsolete
" when they know other parts will work.
This is a perfect fitment.
The flat part of the lever is a little narrower than what was originally on my TS3650 because they changed that part of the design but the actual fitment of the lever in the holder will be the same. These worked perfectly in my TS3650 that you see in the photos. Ridgid realized that the original levers were apparently breaking too easy and redesigned it to make it stronger to use on a subsequent table saw fence. These will only be Guaranteed to FIT as a Replacement FENCE LEVER for the Ridgid TS2400-1, TS24121, TS24120 and also the Ridgid TS3650 or TS3660 Table Saw Fence. Prior to me finding out their secret, I was basically told there was no part available to fix my fence and that the best thing to do is buy a new table saw. ( These companies want you to have to buy new more expensive equipment so they "obsolete" parts so you cannot fix them. )
These Fence Levers are Known to Fit the Following Ridgid Table Saw Models:
TS2400-1
TS24121
TS24120
TS3650
TS3660
So don't be left out in the cold: If you have these models listed in this Item Description these Levers will put your table saw back in business without the need to buy an expensive new table saw.
If you are buying from outside the U.S.A. and using the Global Shipping Program to obtain your part, please know that we charge .95 for U.S.A. Shipping. Anything above that, if you are buying from outside the U.S.A. is not charged nor collected by us and we are not responsible for those ad on costs that occur by that program.  If you live outside the U.S.A be prepared to pay more for shipping through that Program. They do a good job but there are costs involved that are charged for.
*Disclaimer: Pictures of the table saw or any other item other than the Fence Lever itself, in this ad are for reference only and not a part of this offering. TY
THIS PART IS ACTUALLY MANUFACTURED FOR ME WHEN I ORDER IN LARGE LOTS AND TAKES AT LEAST 4-6 WEEKS FOR ME TO GET SOMETIMES LONGER. I DO NOT KNOW HOW LONG THEY WILL BE AVAILABLE TO HAVE THEM TO BE MANUFACTURED.