FLUENT POWER 3/4 HP Submersible Water Pump with Full Stainless Casing

Description

【 3/4 HP Power High Efficiency】- Maximum capacity of transferring water up to 3300GPH with 1.5" discharge port and hose horizontally,Maximum delivery height is 28ft vertical,2200gallons per hour on at 10ft discharge lift.
【Oil-Filled Seal Structure with Thermal Protection】- Oil-rilled seal structure gives pump longer duration,which is much longer than regular mechanical seal.Thermal protector ensures that the pump will not be burned out, Even when the pump trigger thermal overload protector,pump will rework after cooling down.
【GHT 3/4'',npt1''and 1.5''male tread connectors included】- With 1.5''discharge port will give pump maximum output flow rate.Multiple hose adapters help you to get pump started much easire. It also has enough pressure to be connected with a sprayer for garden irrigation.
【Float Switch Automatically Control】- The pump is automatically ON/OFF controlled by float switch according to water level.It starts at water level 30-50cm and stop at 10-15cm.It can remove water down to 1cm by manually control.
【Full Stainless Casing and Long Cable Cord】- Solid metal casing is resistant to rust. This pump is only works with clean water that contains small solid less than 5mm.Pump also comes with a long 26.2ft cable cord, which allows pump to go deep enough(23ft) in the water
;
Specifications:
►Clean/Dirty sump pump with float switch
►Powerful 3/4 HP, copper winding motor, Upgraded Seal Structure
►Durable stainless case construction
►Thermal Overload Protection prevents motor burn because of dry running or impeller block
►Maximum flow rate up to 3300GPH and Maximum lift water up to 28 feet
►Removes water down to 1cm by manual control
►Float and flat base can allows for pit installation and automatic operation
Included in this Package:
►Pump (operating with 110V~120V)
►Instruction Manual
►Multiple Adapter fits discharge hose size 3/4",1", 1-1/4", and 1-1/2" by using clamp or hose thread directly
►After dis-assembled top outlet, its elbow has male thread 1.5" and can be connected with bigger hose
Ideal for:
►It can be used to quickly remove water from pools, ponds, water tank and other large bodies of water
►Irrigating Garden
►Draining flood from cellars or basements
►Powering waterfalls or fountains
►Transferring water from unwanted place
Tips:
►If you want the flow be bigger, the height of the water that you pump out should be lower, and using the 1.5inch discharge port. The bigger the flow is, the wider the outlet should be
►Before starting, tilt the pump to remove all air and wait for 15 seconds
►If the water level is not enough height for float switch freely floating, you can use float buckle mode, pump can still work, which means manual operation