Portable Electric Drill Pump Self Priming Transfer Pump Oil Fluid Water Pump

Description

Portable Electric Drill Pump Self Priming Transfer Pump Oil Fluid Water Pump
Product Overview
Description:
Color: black
Material: plastic.
Product packaging: carton packaging
Pump shank: 8mm round shank
Self-priming: 3 meters
Product Weight: 218g (net weight) 251g (total weight)
Size: 64x 106mm
Tube inner diameter: 15mm
Woking Temperature: 5-49°C (41-120°F)
Impeller Structure: Rubber impeller
Transmission Medium: Oil/Water Pump
Fitment: For Electric Drill
Features:
1.To ensure optimum priming and long life,apply a few drops of lubricating oil in pump inlet prior to each use
and flush with clean water after each use.
2.Be sure inlet hose is airtight and as short as possible. Inlet hose should not exceed 9ft (2.75M).
3.It is recommended that the pump is mounted to a surface for security and ease of use.
4.Exquisite workmanship, small size, light weight, convenient installation.
Note:
1.Manual measuring, please allow 1 ~ 3mm error,thank you.
2.Do not run this pump in reverse. Do not operate the main process drilling pump or allow the power cord to fall into the water while standing in the water. Always stand on a dry floor and keep all the codes dry.
3.If you have any question with our product,please contact us.
Tips:
Install and start the rig - Look at the inlet pipe and see if any fluid is drawn into the pump within 15-20 seconds. If not, check that the inlet pipe is properly installed on the inlet pump. Don't work. If the pump fails to start, check the hose for kinks or blockage.
Package Included:
1 x Drill Pump
2 x Hose clamps