-40%

Saniflo Saniswift Gray Water Pump-Part # 021, 3 Year Warranty- NEW, In Stock

$ 138.67

Availability: 44 in stock
  • MPN: 021
  • All returns accepted: Returns Accepted
  • Model: Saniswift
  • Brand: saniflo
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Type: Gray Water Pump
  • Country/Region of Manufacture: France
  • Return shipping will be paid by: Buyer
  • Restocking Fee: No
  • Item must be returned within: 14 Days
  • Condition: New

    Description

    The SanifloStore is a stocking National Distributor of Saniflo products, we stock these units at our facility in Southern NH.  They are ready to ship or you are welcome to save even more and pick up at our facility.  We have full time expert staff on hand to help answer any questions you may have during your installation.  The big box stores and huge online retailers are great for some things but they are awful for others.
    When it comes to Saniflo, there is no better place to call than the SanifloStore
    -Always In Stock - The Best Price - The Best Customer Care - Factory Authorized Distributor - We Know Saniflo! -
    _______________________________________________________________________________________________________________________________________________________
    The Details:
    Part#:
    Saniflo 021
    Model:
    Saniflo Saniswift Residential Gray Water Pump
    Warranty:
    3 Year Factory Warranty.
    **Unit must be registered with Saniflo by using supplied postcard or on the manufacturers web site
    **If not registered with Saniflo, 2 Year Warranty applies.
    **If you need help with this process and you purchased from us, just give us a call**
    Discharge:
    14ft Vertically and/or 140ft Horizontally
    Power:
    120v/60hz/ .30 HP / 4.5A, Standard 3 Prong Cord
    Discharge Flow Rate:
    at 14' 18 Gal/Minute
    Discharge Flow Rate:
    at 3' 24 Gal/Minute
    Discharge Pipe Size:  1" or 1.5"
    Product Description
    The Saniswift is a drain pump that is suitable for use in a basement apartment or anywhere in the house where additional fixtures are most wanted. It will pump the waste water away from a variety of sources such as: a kitchen sink, laundry sink, washing machine (indirect connection), dishwasher, bar sink, etc.
    The Saniswift's modern style prevails over other bulky relics. This system offers powerful and economical pumping action in a compact, contemporary design. With unprecedented performance and features, this pump is unmatched in its class.
    The inside of the Saniswift is comprised of a pressure switch and circuit board assembly, which starts and stops the unit, and the motor, which drives the pump.
    When the water enters the Saniswift, it activates a pressure switch which in turn starts the motor. The motor is sealed for life in an oil filled enclosure. A spindle/shaft drives the impeller and therefore the moving parts are kept to an absolute minimum.
    The unit pumps the effluent upward to 14 feet and/or 140 feet horizontally (with gravity fall). Once the water is discharged and the water level in the container goes down, the pressure switch deactivates the unit until water enters the unit again. A normal operating cycle for the Saniswift can be as short as 2 - 10 seconds depending upon the discharge pipe run configuration; power consumption is therefore minimal.
    In addition to a sink, the Saniswift will also accept and discharge the waste water from a variety of other sanitary fixtures such as: a kitchen sink, a shower, a urinal. When adding a shower, a base will have to be constructed.
    This base should be made out of a 2" x 6" (minimum) or 2” x 8” (recommended) on edge, to allow for the installation of a P-trap and the required 1/4” per foot gravity flow towards the pump unit.
    The waste water from other sanitary fixtures is discharged into the Saniswift via two 1-1/2 inch inlets, on either side of the housing and an additional inlet on the top of the unit. A non-return valve, which comes already assembled on the discharge rubber connector, prevents back flow into the unit.  The discharge line should be either 1" or 1.5", all sweeping turns and get all your vertical first.
    This unit has been designed with a vent connection on the lid. All plumbing codes require connection to a vent system. Please note that the vent system should be a two-way air vent.  It is also highly recommended for the gray water pump to be connected to a Ground Fault Interrupter (GFI) circuit.
    The Saniswift is a compact unit with attractive rounded contours that fits neatly into tight spaces.
    The Saniswift has been certified to American and Canadian Standards. Electrical standard UL 788, CA: Electrical
    standard CSA C22.2
    Like us on Facebook for Great Information and Specials, just search saniflostore
    Check out our YouTube Channel For Some Great DIY videos, just search saniflostore on youtube.
    Please look at our other listings for more SaniFlo products!