Zero Clearance Throat Plate Insert w/ Splitter for Craftsman Model 113 Table Saw

Description

Created with
Eselt
-
Mobile Templates for eBay Sellers
Give us a call
Send us a message
Created with
Eselt
-
Mobile Templates for eBay Sellers
Our Store
Seller Profile
Feedback
Save this seller
Contact
Created with
Eselt
-
Mobile Templates for eBay Sellers
Zero Clearance Throat Plate Insert w/ Splitter for Craftsman Model 113 Table Saw
Improve the performance and safety of your Craftsman Model 113 Contractor Table Saw with our 3D printed Zero Clearance Throat Plate Insert. Designed to provide a precise, snug fit, this insert helps to prevent chips and sawdust from escaping through the throat plate opening, which can improve the overall quality of your cuts and reduce the risk of injury.
This throat plate insert is a replacement for your original throat plate and requires 2x 10-32 machine screws and 1x 10-32 nut for installation. For assembly simply take the front and back half, put both pieces together with CA on the tabs, clamp gently between two pieces of plywood, and wait 24 hours. Once assembled, sand the insert flush with 200-400 grit sandpaper. Then, take the tab for the back and screw it in with a 10-32 screw. Once screwed all the way in and the plastic threads are stripped, add the nut and screw until firm. Finally, install the insert into your table saw with the remaining 10-32 screw.
In addition to its zero clearance design, this insert also comes equipped with a splitter that helps to keep the kerf open, reducing the risk of binding and kickback. However, it is important to note that table saws are extremely dangerous and it is recommended to use both a GRR-Ripper and push stick when using this insert to prevent most chances of kickback, as the splitter will not be as effective as a riving knife. This insert is provided without liability, warranty, or guarantee, although we do accept returns.
** No hardware or glue is provided
3D Printed from a durable composite
Water, Chemical, and dust-proof
Designed by BenjaminBradley on thingiverse:4927171
Created with
Eselt
-
Mobile Templates for eBay Sellers
Payment
Shipping
All orders ship the same or next business day Monday-Friday
Returns
Free 30 Day Hassle-Free returns, we want you to be 100% satisfied!
Created with
Eselt
-
Mobile Templates for eBay Sellers
Links
Our Store
Seller Profile
Feedback
Save this seller
Contact
Newsletter
Don't miss any offers! We will inform you about our offers and promotions by email.
Subscribe to newsletter
Contact
Give us a call
Send us a message